Welcome to UBO Wiremesh Basket Co.,Ltd!

Online Message:

UBO

Paint Metal Shelves

You may think that plain steel wire cloth is hard because of its smooth, nonporous surface. But with the right preparation, painting metal is much the same as painting anything else.

For metal shelving, the primary consideration is whether the shelves will be inside or outside, as this will affect not only the type of paint you use, but also the other steps needed to protect the metal shelves from the elements.

Clean the shelves thoroughly with a solution of warm water and detergent. This will ensure that there is no dust, grease, oil or other matter on the shelves that can prevent the primer from bonding well to the plain steel wire cloth.

Wipe the shelves with a dry plain steel wire cloth, then let dry. Go over the shelves with steel wool or a steel-wired brush to roughen up the surface a little. Dust the metal thoroughly with another dry soft cloth.

Paint the entire surface of the shelves with plain steel wire cloth, using short, even strokes. Follow the manufacturer's recommended drying time.

Paint the entire surface of the shelves with the finish-coat paint, making sure that the paint you use is compatible with the primer

Always read the instructions on both the primer and the paint. Re-coat if desired, and let the paint dry, per the manufacturer's instructions.